IFS ES2001-4P-4T User Manual
10
Note
Connection to the Switch requires UTP Category 5 network cabling with RJ-45 tips. For more information, please see the
Cabling Specification in Appendix A.
Step 5:
Supply power to the Switch.
A.
Connect one end of the power cable to the Switch.
B.
Connect the power plug of the power cable to a standard wall outlet. When the Switch receives power, the Power
LED should remain solid Green.
2.6 Rack Mounting
To install the Switch in a 10-inch standard rack, follow the instructions described below.
Step 1:
Place your Fast Ethernet Switch on a hard flat surface, with the front panel positioned towards your front
side.
Step 2:
Attach a rack-mount bracket to each side of the Switch with supplied screws attached to the package.
Figure 2-4 shows how to attach brackets to one side of the Switch.
Figure 2-4 Attaching the brackets to the Switch.
You must use the screws supplied with the mounting brackets. Damage caused to the parts by using
incorrect screws will invalidate the warranty.
Step 3:
Secure the brackets tightly.
Step 4:
Follow the same steps to attach the second bracket to the opposite side.
Step 5:
After the brackets are attached to the Switch, use suitable screws to securely attach the brackets to the
rack, as shown in Figure 2-5.
