P/N 1073507A
• REV 00.00 • ISS 4JUL18
5 / 8
3. Right click on the fingertip and select enroll.
4. In the next 25 sec. swipe the finger on the selected reader
min. 5 times and the fingertip will turn green.
5. Repeat point 3 & 4 for each finger that should be enrolled.
6. Click on “Save New” and the fingerprint will be sent
automatically to all biometric readers where that user has
access, i.e. to all the readers according to the Access Level
assign to that user.
Example:
If the user has “Unlimited” Access level then the fingerprints
will be sent to all readers, if the user has Access level only for
Reader 1 and Reader 3 then the fingerprints will be sent only
to those two readers.
Note:
To check if all the fingerprints are sent to the reader,
right click on the reader and select “Memory Status”.
In the event window, a line will appear indicating the number of
fingerprints stored in the reader.
Note:
If more fingerprints are added for one user, all fingerprints will
send the same Wiegand code to the controller, the one written
in the field User ID (card Number).
Note:
Users can be imported from Excel file or from TruPortal
Deleting fingerprints
In general, the fingerprints are stored in the biometric reader
and in the ACL800 BioManager software.
Deleting one user from the biometric reader
Select the user
