6 / 7
P/N 1073502A
• REV 00.00 • ISS 4JUL18
Uploading the fingerprints to the biometric
readers
Right click on the biometric reader
Select “Upload all users to reader”
While receiving the fingerprints, the reader will blink.
Note:
Use this feature when you change or add a
reader, if pending tasks are deleted in the software or
if there are doubts that fingerprints in the reader
memory are not synchronized with the software
database.
In normal usage, the fingerprints are sent
automatically and this feature is not used.
Wiegand output selection
Select the Wiegand output format of the reader in
Settings/Wiegand
Select among the predefined Wiegand outputs or create
custom one.
Send the configuration to the biometric reader
Safety precautions
Do not install the device in a place subject to direct sun light
without protective cover.
Do not install the device and cabling close to a source of
strong electro-magnetic fields like radio-transmitting antenna.
Do not place the device near or above heating equipment.
If cleaning, do not spray or splash water or other cleaning
liquids but wipe it out with smooth cloth or towel.
Do not let children touch the device without supervision.
Note that if the sensor is cleaned by detergent, benzene or
thinner, the surface will be damaged and the fingerprint can't
be entered.
In the event window a line will appear indicating the number of
fingerprints stored in the reader.
Note
: If more fingerprints are added for one user, all
fingerprints will send the same Wiegand code to the controller,
the one written in the field User ID (Card numbers).
