© 2018 United Technologies Corporation.
P/N 1073502A
• REV 00.00 • ISS 4JUL18
Interlogix is part of UTC Climate, Controls & Security, a unit of United Technologies Corporation. All rights reserved.
ACL800SUW-BC - Biometric Touch capacitive
Wiegand Reader - Installation Manual
Description / Operation
ACL800SUW-BC is a Wiegand biometric reader for access
control applications. It offers storage up to 9500 fingerprints
and programmable Wiegand output (24 to 80
bits).Configuration of the readers and fingerprint enrollment is
done through ACL800 BioManager software. Connection
between the biometric readers is RS485 and it is used for
fingerprint transfer and configuration.
When used with third party access controllers, the connection
between the biometric readers and the PC is done through
ACL800FL-CONV-W converter (RS485 to TCP/IP). Only one
converter is needed per system (one converter for 1, 2, 3...30,
31 biometric readers).
The tamper switch output can trigger the alarm system, if an
attempt is made to open or remove the unit from the wall.
Specifications
Fingerprint capacity
Up to 9500 fingerprints
Technology
Biometry
Authentication
Finger
Fingerprints per user
1-10 fingerprints
Interface
Wiegand 24 to 80 bits; default: Wiegand 26bit
Protocol programming
By ACL800 BioManager (all access control
systems)
Cable distance
50 m
Fingerprint Sensor
Type
Capacitive
1:1000 identification
time
970 msec, including feature extraction time
Fingerprint enrollment
On the reader or from the USB desktop reader
Panel Connection
Cable, 1 m
Green and Red LED
Externally controlled
Orange LED
Idle mode
Buzzer ON/OFF
Yes
Backlight ON/OFF
Yes, by software setting
Tamper
Yes
Current requirements
100 mA at 12 VDC
IP Rating
54
Power supply
9 to 14 VDC
Operating
Temperature
Relative humidity
−20 to +50°C
5 to 93% noncondensing
Dimensions (mm)
92 x 51 x 25 (metal); 92 x 51 x 27 (ABS)
Housing
Moulded aluminium
Mounting
Figure 1: Mounting instructions
