ILF DECAL PLACEMENT
For operator safety, all decals appearing in “Decal Kit” must be in a conspicuous place on control side
of liftgate. This is typically a combination of decals on the liftgate and truck or trailer body. Please
make sure to place the maximum capacity decal (C) on driver and curb side.
(A) 1 ATG-URGWA - Urgent warning: Elevating gate instructions
(C) 1 ATG-BKR - Circuit Breaker Reset (must be located at the circuit breaker)
(D) 2 ATG-XXXX - Max. Capacity (please check the serial number plate to find out your specific
capacity)
(E) 1 ATG-RESET - Circuit Breaker Protection
(F) 2 ATG-WLH - Warning: liftgate can crush
(G) 2 ATG-CTN - Caution: Always stand clear of platform area
(H) 1 ATG-CAB - Liftgate Shut-Off (Place Decal next to the On-Off Switch in the Cab)
(K) 1 ATG-WNG - Warning: Use handle to open (must be located underneath handle (main section))
(L) 1 ATG-FT- Notice for Foot Control (if applicable)
Decal - A
Decal - C
Decal - D
Decal - H
Decal - E
Decal - F
Decal - G
Decal - K
Decal - L
Summary of Contents for ILF Series
Page 15: ......
