42
External bay mounting screws
2. From inside the chassis, push the tray out of the external bay. Then grasp the front of the
tray and slide it out of the bay.
3. Do all of the following:
−
Set the SCSI ID on the new drive to an unused ID number
−
Disable termination on the new drive
See Chapter 6, “Peripherals,” for details on these tasks.
4. Do one of the following:
−
If installing a standard disk drive, place the disk drive in the tray, align the mounting
holes, and install the four mounting screws
−
If installing a 1.6-inch device, such as a tape drive or a CD recorder, remove the
mounting guide from the drive tray and attach the guide to the right side of the device
−
If installing a removable disk drive module, do not use the mounting guide
