65
System hard disk drive is not recognized:
Reason
Solution
Hard disk drive power cable not attached.
Open the base unit and ensure power cable is
properly attached. See the System
Reference.
Hard disk drive SCSI cable not attached.
Open the base unit. Ensure the SCSI cable is
properly attached at both ends. See the
System Reference.
SCSI termination is enabled on the hard disk
drive you installed.
Disable the SCSI termination. See the
documentation with the hard disk drive.
Some viruses cause the system to not
recognize hard disk drives.
Run a virus scan program that checks the
Master Boot Record. Clear any viruses
detected by the program.
CD-ROM drive is not recognized:
Reason
Solution
CD-ROM drive power cable not attached.
Open the base unit and ensure power cable is
properly attached. See the System
Reference.
CD-ROM EIDE drive cable not attached.
Open the base unit and ensure cable is
properly attached. See the System
Reference.
Total amount of memory does not display:
Reason
Solution
Faulty DIMM(s).
Identify faulty DIMM(s) by swapping
DIMM(s) until the faulty one is found. See
the System Reference.
DIMM(s) not properly seated into socket(s).
Ensure DIMM(s) are properly installed. See
the System Reference.
I/O Card parity error message displays:
Reason
Solution
Faulty option board is installed in ISA slot.
Remove ISA board, then restart the system.
See the System Reference.
