29
For detailed information about using the Mylex RAID controller BIOS or the Mylex RAID
configuration utility, refer to the Mylex RAID controller documentation. For technical
information about the disk drive bay, refer to the System Reference.
Changing Drive Letters
If you have more than one hard disk drive or CD-ROM drive, you may need to reassign
system drive letters.
To change drive letters:
1. Exit all applications currently running on your system.
2. From the Start menu, click Programs, Administrative Tools, and then Disk Administrator.
3. Select a hard disk drive or CD-ROM drive.
4. From the Tools menu, click Assign Drive Letter.
NOTE
If you select the current drive or an otherwise locked drive, you must restart the system to
complete the drive letter reassignment.
5. Select a new drive letter to assign to the drive from the list. Click OK, and then click Yes
to continue.
6. If necessary, click OK, and then click Yes.
7. Repeat steps 2 through 6 for each drive letter assignment that you want to change.
8. Click Partition, then click Exit. If necessary, restart the system to complete the drive
letter reassignments.
Changing Virtual Memory Settings
If you have more than one hard disk drive, you may need to change size and location of your
virtual memory page file. See Windows NT Help for more information.
Consider the following before changing page file settings:
u
The size of the page file. If your system is equipped with a large amount of RAM, Setup
might create a page file that is unnecessarily large.
u
Drive letter reassignments. If you reassigned your drive letters, you may find it necessary
to adjust your page file settings.
To change the size and location of the virtual memory page file:
1. From Start, click Settings, and then click Control Panel.
