Intergraph InterServe Firewall, Quick Start Manual

Page: 11 / 12

7
u
If you install Eagle NT and later make the system a dual-boot system, the system’s volume ID
will change and the Raptor key will then be invalid.
u
The inside NIC gateway address should be blank.
u
Every inbound and outbound connection at the firewall should be logged.
u
Shut down the Eagle Service on the InterServe Firewall using the command net stop eagle when
configuring notifications.
u
When making changes to the Hawk service, always issue the command update , followed by the
comand save .
u
Most problems relate to DNS. Always check the event log when DNS is initially configured.
Utilities like
nslookup are very useful in troubleshooting DNS problems.