Interflex Datensysteme GmbH
12/23
14.4 Establishing a Telnet Connection
Establish a TELNET connection via the factory-set IP address. A login can be performed after connection
setup.
Log in by entering the user name
root
and the default password
Haydnstr
(note exact spelling). The user
then has access to the consoles and Linux commands.
15 Touch Screen
Using the touch screen of the device, you can easily perform a booking or view account values.
Make sure that the touch screen does not come into contact with other electrical equipment. Electrostatic
discharges may cause malfunctions.
Make sure that the touch screen does not come into contact with liquids. Moisture or contact with liquids
may cause malfunctions.
To ensure optimal functioning of the touch screen, remove the protective film from the display before
using the device for the first time.
The touch screen has a layer that detects small electrical discharges, such as those emitted by the human
body. Touch the screen with your fingertip. The touch screen does not respond when touched with a sharp
object such as a stylus.
16 Proximity Sensor
The terminal is equipped with a proximity sensor. If the terminal is not in use, it switches to (power-saving)
sleep mode. When someone approaches the terminal, it wakes up and is immediately available.
17 Technical Specifications
Electrical Data
Power supply
18-24 VAC, 18-24 VDC or PoE device of power class 3
Power consumption
Approx. 12 VA
Interfaces
Ethernet 10/100MB; TTL service interface
Reader
RFID MIFARE or LEGIC (depending on order)
Display
4.3 inches color display with a resolution of 480 x 272
Touch
Capacitive
Degree of protection
IP30
Safety standard
EN 60950-1
Equipment protection
(EMC)
EN 300330-1/-2 EN 301489-1/-3
General Data
Ambient temperature
+4°C to +40°C
Humidity
95%, non-condensing
Dimensions (LxWxD)
163 mm x 87 mm x 45.8 mm
Weight
Approx. 0.4 kg