Interflex Datensysteme GmbH
8/23
12 LEDs and Switches
1
Anti-tamper switch
The anti-tamper switch triggers an alarm when the housing is opened. To suppress this
alarm, it must be turned off by a parameter setting in the time recording program.
2
Bus LED
Indicates data traffic with one slave terminal.
3
Speed LED
LED lights up only with 100Mb network connection.
4
Net LED
LED lights up as soon as the terminal is detected by the network.
5
Reset button
The Reset button ends active processes and triggers a reboot (restart).
6
SW switch 2
The SW switch is used to set the standard IP address 172.18.70.52 and temporarily
store the specified IP address.
7
Cold boot switch 1
The cold boot switch is used to delete stored data and set default parameters.
8
Power LED
Lights up when operating voltage is switched on.
9
Adhesive tape
The adhesive tape is applied over the mortise lock to prevent electrostatic discharges.
10 Battery
Battery for clock
