Interflex Gold series, Owner'S Assembly And Operating Manual

Page: 9 / 19

NOTE: Plastic must be removed from both adjustable base and mattress to ensure proper ventilation
and avoid possibility of mildew and odor. Dispose of plastic covering properly to avoid injury.
The InterFlex Adjustable Base has been designed to allow two (2) Split King or Split Cal-King bases to
work in conjunction with a one-piece King Mattress as well as a one-piece Cal-King mattress. In order
for your bases to work simultaneously with one (1) Hand Control the beds must be set up prior to
operation via the electronics.
Assembling one piece king (2 - twin extra long bases to work simultaneously)
1. When configuring 2 twin extra long base together to work simultaneously follow
the above unpacking instructions.
2. Disconnect one hand control that will not be used by un-attaching the telephone
type cable at the rear of the remote control.
3. Locate the other end of the cable at the electronic control box port and unattach,
move in the port labeled “secondary” the other end should be installed into the
other base electronic box in the secondary port as well.
4. Plug both bases into a power source and push the head up button, both bases should
operate simultaneously.