background image

SPECIAL NOTES 

IMPORTANT: READ WARNINGS BELOW 

This bed is for residential use only. This bed is NOT for hospital use and  was not designed to meet hospital standards. Please 
adhere to the following safety warnings: 

• 

DO NOT use this bed outdoors. 

• 

DO NOT use near explosive gases. 

• 

Possible fire hazard when used with oxygen administering equipment other than nasal masked type. 

• 

When using nasal or masked type administering equipment, oxygen or air tubing MUST be routed 
and secured property to ensure that tubing does NOT become entangled and damaged during 
normal operation of the bed. 

• 

When using liquids in or around the bed, caution should be taken to ensure that liquids of any kind 
are not spilled. If a liquid is spilled in or around the bed stand in a dry, clean area and UNPLUG the 
bed immediately. Clean up spill and allow bed and area around bed to dry thoroughly before using 
the electric controls again. 

• 

Do not EAT or DRINK hot liquids while operating the bed. 

• 

DO NOT ALLOW CHILDREN OR INDIVIDUALS WITH DISABILITIES TO OPERATE THE 
BED WITHOUT ADULT SUPERVISION. 

• 

DO NOT LET CHILDREN ON OR NEAR THE BED UNATTENDED. 

• 

NEVER PERMIT ANYONE OR PETS UNDER THE BED AT ANY TIME. 

• 

When operating beds, ALWAYS ensure that the individual utilizing the bed is positioned properly 
within the confines of the bed. Do not let any extremities protrude over the side of the bed when 
performing these functions. 

• 

This product is not a medical product and is not intended for medical purposes. It is for in-home
use only. 

Summary of Contents for Gold series




















Reviews: