MCA-E4852A Ver. 1.1
-11-
Interface Corporation
Chapter 5 Installation
BE SURE TO ELIMINATE STATIC ELECTRICITY OF YOUR BODY BEFORE YOU INSTALL
OR REMOVE THIS PRODUCT.
5.1 Card Installation
When you install this product in your system, read the manual of your system which refers to the PC card slot.
！
Be careful of the insert direction when you insert this product into your system to avoid system
damage.
1.
Make sure that the system is turned off and the power cable is unplugged.
(This card corresponds to Hot Swap. You can insert this card when the system turns on.)
2. Insert the card into the PC card slot in your system.
3. Plug in the power cord, and turn on the system.
5.2 Driver Software Installation
Refer to our Web site for the Help of each optional software when you install and use it.
5.3 Card Uninstallation
The method of removing PC card from your system differs depending on each system. Please read the manual
of your system.
！
Do not remove this product when accessing to the external equipment. Your system may not operate
correctly.
Summary of Contents for MCA-E4852A
Page 21: ...MCA E4852A Ver 1 1 Vol 1 1...
