background image

 

 Polimerizator AQUAMAT GB

 

 

  10

 

WARRANTY FOR PRODUCT REF.: 0689

 

 
 
Product: AQUAMAT 
Serial number: 

………………………………………

 

Date of sale: ………………………………………….

 

Signature of the seller: ………………………….

 

 
 
Warranty declaration: 

 

The product will work flawless during the warranty period if being 
administered in accordance with its purpose and the instructions 
provided;   

 

Warranty period expires after 12 months from purchase day. At 
your request, we will repair failure or defects on the product, if you 
will report it within the warranty period. Failure will be resolved 
free of charge within 45 days from the date of failure report. The 
product, which will not be repaired within this deadline, will be, at 
your request, replaced with a new one. We will extend the 
warranty period for the time the product was being repaired.  

 

Validity of the warranty should be proofed by certified warranty 
card and original invoice.  

 
The warranty is voided: 
 

 

If an unauthorized person interferes into the device 

 

If provided instructions for use are not being considered 

 

If the device is being mechanically injured 

 

If the unoriginal spare parts are being built in 

 

Summary of Contents for AQUAMAT











Reviews: