26
ADAPTATION OF THE SEAT SHELL TO THE PATIENT
Scope of supply
Seat and back unit made of aluminium, powder-coated in high-gloss silver,
including physiological turning points� Including continuous regulation of
depth and height of seat via longitudinal holes, variably adjustable back-
rest, adjustment of rear angle via gas pressure spring, height or width
adjustable trunk guiding pressure pads, trapezoidal adapter for the fasten-
ing of the seat unit for underframes including trapezoidal adapter mount�
Cover made of high-quality upholstery cloth „Black Malo CS”�
The design of the seat shell including original accessories is designed for and
adapted to the patient’s individual needs� In case of alterations to the fit, clinical
picture or the like further adaptations may only be performed by the competent
specialized company� General alterations as to form, upholstery, technique or
the like may not be performed without the manufacturer’s consent; otherwise
such alterations will result in a loss of guarantee�
5. Adaptation of the seat shell to the patient
Attention:
Alterations as to fit, clinical picture or the like may only be performed
by the competent specialized company!
5
.
1
Adjustment of width of seat
Loosen the four setscrews for the adjust-
ment of the seat width on the lower side of
the seat shell by means of a hexagon socket
screw key such that the connection can be
moved (Photo
1
)� Also loosen the setscrews
on the back of the seat shell (Photo
2
), two
pieces each at the bottom on each side (
3
)�
Then you can set the width of seat to the
dimension desired� Following that, tighten
the screws again� Upon completion of the
setting works check all connections for firm
fit again�
5
.
2
Adjustment of depth of seat
Loosen the setscrews for the adjustment of
depth of seat at the bottom of the seat shell
by means of a hexagon socket screw key
2
1
