15
o
Coil Nailer
Drives Wire Collated Nails (2" to 3-1/4")
Model No. CN80-15, Item No. 65565
Model No. CN80F-15, Item No. 65566
13
Interchange Brands
Operator’s Manual
Nail Loading
1 .
OPEN THE MAGAZINE
Hold door and door latch and pull
up door latch . Swing door open .
Swing magazine cover open .
2 .
CHECK ADJUSTMENT
The nail support can be moved
up and down to four settings . To
change setting pull up on the post
and twist to the correct step . The
nail support should be adjusted
correctly to the position indicated
in inches and millimeters inside
magazine .
3 .
NAIL LOADING
Place a coil of nails over the post in
the magazine . Uncoil enough nails
to reach the feed pawl and place
the second nail between the teeth
on the feed pawl . The nail heads fit
in slot on nose .
4 .
SWING COVER CLOSED
5 .
CLOSE THE DOOR
Check that the latch engages . ﹙If
it does not engage, check that the
nail heads are in the slot on the
nose﹚ .
