manualshive.com logo in svg

Interactive Technologies MicroTech DMX, User Manual

Share
Download
Interactive Technologies MicroTech DMX User Manual Download Page 15

Specifications

Functions

Display Channel Function

-

View any channel 1 - 512

-

Three display modes
-

Percent (0 to FL)

-

Decimal (0 to 255)

-

Hexadecimal (00 to FF)

-

Full 8-bit resolution for decimal and hexadecimal display modes

Channel Finder Function

-

Displays channel number of channel that is tracking up or down

-

Holds last channel number for 1 second

Channel Test Function

-

Transmits test level to single selected dimmer, to one of 30 dimmer
groups or to all dimmers simultaneously

-

Quickly scrolls through all 512 channels

-

Test level can be raised or lowered to desired value

-

Automatically yields to any other external source of DMX

Scene Record Function

-

Records up to 30 static scenes (snapshots) in non-volatile EEPROM
memory

-

Each scene may contain up to 512 dimmer levels

-

Memory retention greater than 40 years without battery power

Scene Edit Function

-

Edits any of 30 scenes in non-volatile EEPROM memory

-

Channel levels may be independently raised and lowered to any
desired value

-

Scenes are edited with “live” output to DMX equipment

-

Automatically yields to any other external source of DMX

Scene Output Function

-

Transmits any of 30 scenes from non-volatile EEPROM memory

-

Easily steps from scene to scene

-

Automatically yields to any other external source of DMX

-

Acts as a console backup if external DMX signal is lost due to con-
sole failure

Data Length Function

-

Displays the number of dimmers being transmitted by the console

Update Rate Function

-

Calculates the speed at which console is transmitting new channel
levels

-

Display is in updates per second

Error Count Function

-

Monitors DMX line for transmission errors

-

Displays accumulated total of errors received to facilitate cable
and/or connection checking

Display Type Function

-

Changes the display type used for showing channel levels in the
Display Channel, Channel Test and Scene Edit functions

-

Three display modes
-

Percent (0 to FL)

-

Decimal (0 to 255)

-

Hexadecimal (00 to FF)

Power Supply

Battery Operation

-

Uses 2 “AA” size alkaline batteries

-

Battery life is typically greater than 20 hours of continuous opera-
tion (depending on functions used)

AC Operation

-

Powered from AC wall adaptor

26

MicroTech DMX User’s Manual

MicroTech DMX User’s Manual

27

Summary of Contents for MicroTech DMX

















Reviews:

No comments

Brands by name

Popular brands

Load more brands