10
11
Attach the backrest pad
Attach the headrest pillow
1. Place the plastic protector over the headrest frame and pull it down
over the backrest frame as far as it will go (this protects the backrest
pad from getting caught on the frame during assembly).
2. Holding the backrest pad with the flap to the back of the
chair, gently slide the backrest cushion over the head/
backrest frame until it meets the seat pad.
3. On the lower back edge of the backrest, fold the flap over
the black cable and straight back,then attach it to the
bottom of the chair using the hook and loop fasteners.
4. Pull the small strap located on each side of the front of the backrest
through the frame toward the back, and attach it to the matching
strap on the back of the backrest using the hook and loop
fasteners.
5. On the front bottom of the backrest pad, make sure the top flap of the seat
pad is securely attached to the inside of the backrest pad, using the hook
and loop fasteners.
The Perfect Chair
®
Assembly Instructions
(continued)
Attach the headrest frame
1. For your convenience, and to better position the chair for the remaining assembly,
plug in the chair, then gently press down on the electric recline lever to adjust the chair
to an upright position.
2. Using a Phillips head screwdriver, remove the two
screws from the headrest frame. Retain them for use
in step 4.
3. With the arc of the headrest frame pointing
backward, slide the two ends of the headrest frame
into the holes in the top of the backrest frame.
If the headrest frame is installed backward, the
screw holes on the headrest frame will not line
up with the screw holes on the backrest frame.
4. Replace the two screws using a Phillips head
screwdriver, securing the headrest frame to the
backrest frame.
Attach the headrest pillow to the headrest
using the hook and loop fasteners.
