8
9
Seat pad
Headrest frame
Backrest pad
Headrest pillow
Top flap
Bottom flap
Flap
Top flap
1. Slide the seat pad onto the lower part of the
chair frame, making sure that the frame slides
into the fabric pocket located on the
bottom side of the pad.
2. Push the flaps located at the top corners of the
seat pad down between the pad and the chair
arms, around the chair frame, and secure
them using the hook and loop fasteners.
3. At the top center of the seat pad, fold the top flap
forward, to enable you to reach the bottom flap.
4. Wrap the bottom flap around the frame by tucking it under the frame, pulling
it up and toward you, then attaching it to the seat pad using the hook and
loop fastener.
5. Lay the top flap back flat against the backrest frame.
6. Attach the two straps on the bottom of the seat
pad together using the hook and loop fasteners.
The Perfect Chair
®
Assembly Instructions
Confirm the package contents
Remove all contents from the box and make sure you have each of
the following items:
NOTE:
You will need a Phillips head screwdriver to complete these
assembly instructions.
CAUTION:
Sitting in the Perfect Chair
®
before it is completely assembled
could result in permanent damage to the chair and personal injury.
Chair
Attach the seat pad
