specifications
*
Operating Voltage:
110 -120 VAC
Power Consumption:
120 Watts
Size:
Chair (reclined) 81.5” L x 36.50” W x 26.75”H
Weight:
Chair 247 Lbs
Recline Angle:
110 - 170 Degrees
Number of Massage Functions:
Fourteen (14)
Massage Head Storage:
Auto at Top
Automatic Timer Shut-Off:
15 minutes
Total Massage Stroke Length:
27 Inches
Rolling:
1 Speed
Kneading:
2 Speeds and Auto
Compression:
2 Speeds
Percussion:
2 Speeds and Auto
Kneading Percussion:
2 Speeds and Auto
Seat Air Massage:
2 speeds
Arm Vibration:
1 speed
Acupoint Detection:
1 speed
Auto Programs:
8 versions
Built in Calf / Foot Combo Massage
Vibration:
1 speed
Massage:
2 speeds and 2 Auto Programs
Maximum weight:
285 Lbs
Cover Fabric Material:
Leather and Leather match
Accessories:
Head Pillow
Luxury Ergo Pillow
Power Cord
Use and Care Manual
*Specifications are subject to change without prior notice.
www.interhealth.com
21
20
General Maintenance
1. Be sure to disconnect the power cord from the electrical outlet before cleaning.
2. Do not use benzene, thinner or any other solvents on your massage chair.
3. Remove dust on the backrest or armrest with a vacuum.
4. If the backrest or a armrests become soiled, wipe with a damp cloth, then a dry cloth.
5. Common upholstery cleaners may be used for tough stains.
6. When cleaning the controller or around the power switch, use a dry cloth only. Never use a damp cloth to
clean the controller or power switch.
7. It is suggested that you cover the chair when not in use for a long period of time.
8. The mechanics of this product are specially designed and constructed to be maintenance free.
No periodic lubrication or servicing are required.
9. Foreign objects should not be inserted between the massage nodes or the unit housing.
10. When not in use for a long period of time, we recommend that the power cord be coiled and
that the unit be placed in an environment free of dust and moisture.
11. Do not store near heat or open flame. Do not leave this product exposed to direct sunlight
for long periods of time. This may cause fading or damage.
To keep your product working and looking its best, please follow these
simple care guidelines.
CARE AND
MAINTENANCE
1. Turn the
Power switch to OFF and unplug
the chair from the wall outlet.
2. Using a small screwdriver or a coin, turn the fuse holder (located on the power panel)
approximately 1/8 turn counter-clockwise. The fuse holder pops slightly out.
3. Replace the fuse with a new fuse of the same value, then reinsert the fuse holder into the power panel.
4. Turn the fuse holder 1/8 turn clockwise to secure it.
5. Plug the chair back into the wall outlet and turn it on.
To replace a fuse:
Your HT
™
-1650 has two fuses: one for the chair and one for the convenience outlet.
Moving your massage chair after it has been unpacked:
Your massage chair is a precision instrument that can be damaged if dropped.
Use at least two people to move it.
1. Fully retract the calf+foot massager.
Never pick up the chair by grasping the calf+foot massager.
2. Store the remote control in the side pocket.
3. Grasp the chair at floor level, beneath the side arms.
