Inter-m RM-6800, Operation Manual

Page: 13 / 28

SySteM ReMote MIc StAtIon
11
RM-6800
8) If you want to cancel after adding a number to broadcast, re-enter the same number to remove it
(Remove).
9) When inputting a number to broadcast on the input screen, you can broadcast by selecting this is the
talk key.
- TALK SCREEN
1) you can modify the MIc Mute on/off settings by using the * key.
2) you can modify the AUX Mute on/off settings by using the # key.
3) you cannot set Mute as on for both MIc and AUX at the same time.
4) When the priority broadcast is progressed according to the priority of broadcasting, it switches to the
standby screen (if ecS-6216P is connected) or "BUSy" is displayed on the talk screen (if PX-6216 and
nPX-8000 are connected).
5) According to the talk type during the broadcast, when the talk button is operated, the standby screen is
switched after the broadcast ends.
※
For information about setting the talk type, refer to page 18 of this manual.
- BUSY MESSAGE SCREEN
1) When the key is pressed in the Busy status according to the system priority broadcast on the standby
screen, the message "the other source is broadcasting" (ecS-6216P) or "BUSy Zone" (PX-6216 or
nPX-8000) is displayed.