background image

DIV-9123  

Electronic 

Crossover 

 

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other 
devices (including amplifiers) that produce heat. 

 

9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized 
plug has two blades, with one wider than the other. A grounding type plug has two 

blades and a third grounding prong. The wide blade or the third prong is provided for 

your safety. If the provided plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet. 

 

10. Protect the power cord from being walked on or pinched, particularly at plugs, 
convenience receptacles, and the point where it is attached to the apparatus. 

 

11. Use only the attachments/accessories specified. 
 

12. Use only with a cart, stand, tripod, bracket, or table specified, or sold with the 
apparatus. When a cart is used, use caution when moving the cart/apparatus 

combination to avoid overturning. 

 
13. Unplug this apparatus during lightning storms or when unused for long periods of 

time. 

 
14. Refer all servicing to qualified service personnel. Servicing is required when the 

apparatus has been damaged in any way, such as power supply cord or plug is 

damaged, liquid has been spilled or objects have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture, does not operate normally, or 

has been dropped. 

 

 

 

 

4

Summary of Contents for DIV-9123













Reviews: