background image

DIV-9123  

Electronic 

Crossover 

Welcome   

 

 

 

 

 

 

 

 

                                 

 

 

A personal welcome to you from the management and employees of Inter-M 

 

Thank you for purchasing this fine Inter-M product. All of us here at Inter-M are dedicated 
to providing you the highest quality products and the best value.  

 
We sincerely trust this product will provide you with years of satisfactory service, but if 

anything is not to your complete satisfaction, we will endeavor to make things right. 

 
Welcome to Inter-M, and thank you for becoming a part of our worldwide extended 

family! 

 
 

Unpacking 

 

Although your DIV-9123 is neither complicated nor difficult to operate, we recommend 
you take a few minutes to read this brief manual and familiarize yourself with the 

important information regarding product features, setup and operation. 
 

As with most electronic devices, we strongly recommend you retain the original 

packaging. In the unlikely event the product must be returned for servicing, the original 
packaging (or reasonable equivalent) is required. 

 

 
Warnings 

 

 

Environment 
 

Never place this product in an environment that could alter its performance or reduce its 

service life. Such environments are usually characterized by high levels of heat, dust, 
moisture, or vibration. 

 

 

Safety 

 

1. Read these instructions carefully. 
 

2. Follow all instructions. 
 

3. Keep all warnings. 

 
4. Do not operate this apparatus near water. 

 

5. Clean only with a damp cloth. 
 

6. Do not block any of the ventilation openings. 

 
7. Install only in accordance with the instructions in this manual. 

 

3

Summary of Contents for DIV-9123













Reviews: