Intenso Alarmbox, User Manual

Page: 14 / 75

Page 4 of 9 EN
6. Operation
a) Turning on and off
Keep the - button pressed for 2 seconds in order to turn the device on or off.
Please note:

If the device doesn’t respond, first make sure that the battery is charged or that an
external power supply is established. In this case, briefly press the reset button by
inserting a thin object (such as a needle) into the reset hole and then press the -
button again for 2 seconds. The device should now turn on.
b) Charging the battery
When the state of charge is low, please connect the device with the included USB cable
and via the USB port to a computer, or use the included network adapter to charge the
batteries.
c) Insert a memory card
Insert the memory card with the brand logo facing down completely into the designated
card reader, until it perceptibly and audibly clicks into place. To remove the SD card,
gently press it into the card reader. The spring mechanism releases the card until it comes
forth. Now you can easily pull out the card.