39
38
G E O M E T R Y
FLIP CHIP
GEOMETRY ADJUSTMENT
A
The INTENSE Tracer 279 has a ‘Flip Chip’ feature
which allows you to alter the geometry of your bike
between two positions. The bike comes from our
factory in the HI (High) setting. The HI setting is
engineered to perform the best in the roughest and
most technical terrain. The LO setting is engineered to
perform the best in slightly smoother, high speed trails
such as what could be found in many bike parks. The
LO setting will slacken the head angle a little, lower
the bottom bracket and standover, shorten the reach
by 5mm, creating slightly firmer suspension.. What
position you have the Flip Chip in comes down to
personal preference, riding style and the type of terrain
you normally ride on. Follow the steps below or check
out the Tech Video for more details.
The Flip Chip on the INTENSE Tracer 279 is located
on the Lower Link of the suspension system where
it bolts onto the rear shock. With the bike fully built
the Flip Chips are hidden, so in order to gain access
to them you will need a 5mm Allen key and a torque
wrench. The basic process involves removing the rear
wheel, unbolting the Rear Triangle from the Top Link,
which will then give you access to the Bottom Link and
the Flip Chips.
