Intense SNIPER T ELITE, Manual

Page: 22 / 27

43 42
GEOMETRY TAKEN AT TOP OUT WITH 530.2MM AXLE TO CROWN LENGTH AND 51MM FORK OFFSET
SIZE SMALL MEDIUM LARGE EXTRA LARGE
WHEELBASE 1143MM / 45” 1169MM / 46” 1196MM / 47” 1222MM / 48”
TOPTUBE LENGTH 589MM / 23.1” 614MM / 24.1” 640MM / 25.2” 665MM / 26.1”
CHAINSTAY LENGTH 439MM / 17.3” 439MM / 17.3” 439MM / 17.3” 439MM / 17.3”
HEADTUBE LENGTH 90MM / 3.54” 95MM / 3.7” 105MM / 4.13” 115MM / 4.5”
HEADTUBE ANGLE 66.4˚ 66.4˚ 66.4˚ 66.4˚
REACH 409MM / 16.2” 433MM / 17.1” 457MM / 18.0” 479MM / 18.9”
STACK 578MM / 22.7” 583MM / 22.9” 593MM / 23.3” 602MM / 23.7”
BB HEIGHT 339 MM / 13.3” 339MM / 13.3” 339MM / 13.3” 339MM / 13.0”
BB DROP 30MM / 1.17” 30MM / 1.17” 30MM / 1.17” 30MM / 1.17”
SEATTUBE ANGLE (EFFECTIVE) 72.8˚ 72.8˚ 72.8˚ 72.8˚
SEATTUBE LENGTH 406MM / 16” 437MM / 17.2” 488MM / 19.2” 538MM / 21.2”
STANDOVER HEIGHT 779MM / 30.7” 781MM / 30.76” 786MM / 31” 791MM / 31.2”
FORK AXLE TO CROWN 527.1MM / 20.75” 527.1MM / 20.75” 527.1MM / 20.75” 527.1MM /20.75”
FORK OFFSET 51MM / 2.01” 51MM / 2.01” 51MM / 2.01” 51MM / 2.01”
FRONT CENTER 704MM / 27.7” 730MM / 28.7” 757MM / 29.8” 783MM / 31”
S N I P E R T
GEOMETRY CHARTS
SNIPER T // SIZE LARGE SHOWN
You have purchased a high-performance bicycle which requires a certain level
of service and maintenance to sustain the level of performance your frame was
designed around. Proper care will also ensure the bike is safe to ride at all levels.
It is important to read and understand the carbon care information as well as
follow the maintenance schedule and inspect your bicycle before each ride. These
will not only help to limit or avoid costly repairs but will also help to avoid injury
due to service neglect and component failure.
ACTION EVERY 500 2000 4000
RIDE MILES MILES MILES
OR OR OR
1 MTH 6 MTHS 1 YR
TIRES CHECK AIR PRESSURE, INSPECT TREAD AND X
SIDEWALLS FOR TEARS AND PUNCTURES
CHAIN BRUSH OFF AND LUBRICATE X
BRAKES SQUEEZE BRAKES AND CONFIRM FUNCTION X
GENERAL CLEAN COMPLETE BIKE OF MUD AND DEBRIS X
HEADSET CHECK ADJUSTMENT X
BOX LINK ADD GREASE THRU ZERK FITTINGS X
FRAME PIVOTS CHECK TORQUES X
SPOKES INSPECT FOR DAMAGE, CHECK TENSION X
SHOCK & FORK CHECK AIR PRESSURE, INSPECT FOR LEAKS X
DERAILLEUR CABLES INSPECT AND LUBE X
SEATPOST CLEAN AND REGREASE INTERFACE WITH FRAME X
FRAME PIVOTS REMOVE PIVOT BOLTS, CHECK BEARINGS FOR X
PITTING AND WEAR
HEADSET DISASSEMBLE STEM, HEADSET AND FORK. X
CHECK BEARINGS FOR PITTING AND WEAR
HUBS PULL WHEELS OFF, CHECK HUB BEARINGS X
FOR PITTING AND WEAR
BOTTOM REMOVE CRANKARMS AND CHECK BB X
BRACKET (BB) BEARINGS FOR PITTING AND WEAR
BRAKES REPLACE BRAKE PADS X
CHAIN INSPECT FOR DAMAGE AND CHECK X
FOR STRETCHING
GENERAL COMPLETE TUNE-UP X
B I K E C A R E
MAINTENANCE
SCHEDULE
REACH
458
MM
105
MM
ST
ACK
592
MM
WHEELBASE
1195
MM
439
MM
488
MM
BB DRO
P
30
MM
66.5º
73º