21
20
S T E P 5
INSTALL
FRONT WHEEL
Remove all packaging from the wheel (make sure
the hub end caps are still in the correct place). Then
remove the brake pad spacer
(A)
(orange, yellow or
red) and the front wheel axle from the fork
(B)
.
Position the wheel so that the rotor fits into the brake
caliper body and that the hub body slots into the
grooves on the fork
(C)
. When everything is in the
correct place reinsert the front wheel axle and tighten,
then clamp it tight using the quick release lever
(D)
.
There should be some resistance when the lever is
flipped into the vertical position.
A
B
C
D
