1 0
/ / P R I M E R 2 9 u s e r m a n u a l
I N T E N S E C Y C L E S / /
1 1
T IGH T E NING S E AT S TAYS TO TOP L INK //
A
Grease and install adjuster cone
(#130807) into head of main pivot bolt
(#130791) and greased M6x22mm bolt
(#410032) through the adjuster cone
into the main pivot bolt (IMAGE #14).
B
Using hand pressure, squeeze the top
of seat stay together at the lower top
link location to eliminate side to side
play (IMAGE #15) then use a 5mm HEX
to make snug.
C
Torque M6x22mm (#410032) to 14 NM
or 125 in/lbs (IMAGE #16).
IN S TA L L ING R E A R S H OC K //
A
Holding rear shock match forward end to forward shock mount, and install greased
M6x40mm bolt (#410050) through drive side of frame (IMAGE #10). Do not tighten.
B
Match rear end of shock to desired travel setting (see below) on upper link and
install greased M6x45mm bolt (#410051) through non-drive side of link (IMAGE #11).
C
Torque shock bolts (#410050 & #410051) to 7 NM or 60 in/lbs (IMAGES #12 & 13).
adjustable travel NOTE
the top link of the PRIMER 29 features dual mounting positions. The Upper shock
mounting hole on top link is for LONG travel, the lower hole is for SHORT travel.
for more information see the set up guide on page 14.
7
6
8
9
15
10
12
14
16
11
13
C ONNE C T ING R E A R T R I A NGL E
TO B OX L INK //
A
Follow previous step to connect rear
triangle to box link (IMAGES #6 & 7).
B
Use 8mm HEX to install, then torque
pivot bolt (#130791) to 7 NM or 60 in/lbs.
C ONNE C T ING R E A R T R I A NGL E
TO TOP L INK //
A
Holding spacers (#130765) with squared
edges against the bearing and the rounded
side facing outward (IMAGE #8), Swing
the seat stays up and align with the lower
spacers. From the non drive side of top
link, install greased pivot bolt (#130791)
(IMAGE #9). Use an 8mm HEX to install.
B
Use an 8mm HEX to install torque
main pivot bolt (#130791) to 7 NM or
60 in/lbs.
INSTALLING ADJUSTER CONES ON LOWER LINK //
A
Grease and install adjuster cone
(#130807) into head of main pivot bolt
(#130791) and greased M6x22mm bolt
(#410032) through the adjuster cone into
the main pivot bolt (IMAGES #17 & 18).
B
Torque M6x22mm (#410032) to 14 NM
or 125 in/lbs (IMAGE #19).
17
19
18
Summary of Contents for PRIMER 29
Page 1: ...user manual PRIMER 29...