Intenda CARAVAN BOX Installation, Use And Maintenance Handbook Download Page 4

 

1.2. 

 General precautions regarding the use of the product 

 

These indications are part of the normal behavior that workers must have towards the product and 
therefore in the design and construction of the product, the manufacturer considered them known to 
the tenant. It is the user's task to inform (by delivering this manual) and train the employees (users 
and maintenance technicians) so that these indications are brought to the attention of the staff who 
will work with the structure.  
 
-  Always  use  anti-cut  gloves  when  closing  or  opening  the  structure,  during  adjustments  or 
maintenance (described in the following chapters). When finished, wash your hands with soap and 
water.  
- Immediately clean any accidental contacts of corrosive products that come into contact with the 
structure to avoid rapid deterioration.  
- Do not allow unauthorized personnel to work with the equipment.  
- Before using the equipment, make sure that any dangerous to safety conditions have been properly 
eliminated.  
- Make sure that all the guards and other protections as well as the structural fixings are in place and 
that all the safety devices are present and efficient.  
- Make sure that there are no foreign objects in the sliding area of the structure.  
- Individual protection devices must be used such as:  
 

o Safety clothing  

 

o Safety shoes  

 

o Cut resistant gloves 

 The protection systems must be used in the following phases:  
- Structure maintenance operations (cleaning, checking or adjustment)  
- Operating operations (closing and opening)  

 

1.3. 

Structure of the manual 

 

 

This manual consists of eight parts which contain:  

 
• 1. GENERAL RULES AND WARNINGS, useful premises for using and understanding the manual;  
• 2. GENERAL INFORMATION, useful premises for identifying the box;  
• 3. TECHNICAL DATA, information on the characteristics of the box;  
• 4. OPERATING INSTRUCTIONS, interface for the safe use of the box;  
• 5. MAINTENANCE, advices and recommendations;  
• 6. DEMOLITION AND DISMANTLING OF THE STRUCTURE, instructions and recommendations;  
• 7. SPARE PARTS, detailed list of the parts that make up the box.  
 
 
The user manual makes use of the following typographical conventions: 

 

 

Summary of Contents for CARAVAN BOX























Reviews: