78
FCC Information
FCC Information
1.This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On bottom of this equipment is a label that contains,
among other information, a product identifier in the format US: 6NYW400BITC58502.If requested, this number must be provided to the telephone company.
2. An applicable certification jacks Universal Service Order Code(USOC) for the equipment is provided(i,e., RJ11C) in the packaging with each piece of approved
terminal equipment.
3. A plug and jack used to connect this equipment to the premise wiring and telephone network must comply with the applicable FCC Part 68 rules and require-
ments adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connect to a compatible modular
jack that is also compliant. See installation instructions for details.
4. The REN is used to determine the number of devices that may be connected to telephone line. Excessive RENs on a telephone line may result in the device’s
not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five(5.0). To be certain of the number of devices that
may be connected to a line, as determined by the total RENs, contact the local telephone company. [ For products approved after July 23,2001, the REN for this
product is part of the product identifier that has the format US: 6NYW400BITC58502. The digits represented by ## are the REN without a decimal point(e.g., 03
is a REN of 0.3). For earlier products, the REN is separately shown on the label.]
5. If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be
required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
6. The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this hap-
pens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.
7. Please follow instructions for repairing if any (e.g. battery replacement section); otherwise do not alternate or repair any parts of device except specified.
8. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for
information.
9. Should you experience trouble with this equipment, please contact:
IntelliTouch
5160 Carroll Canyon Road
San Diego, CA 92121-1775
Customer Service: (800)296-3084 8 a.m. To 5 p.m. PST, Monday through Friday
Hearing Aid Compatibility
This telephone system meets FCC standards for Hearing Aid Compatibility.
CAUTION:
To maintain compliance with the FCC’s RF exposure guidelines, place the base unit at least 20cm from nearby persons.
Summary of Contents for 5850-2
Page 1: ...O W N E R S M A N U A L 5850 2 5 8Ghz Digital Cordless Phone...
Page 81: ......
