15
3. Network Connection And Setup
You can set up the network settings according to your network configurations.
3.1
Connecting the camera directly to local area networking
Connecting to the camera from a local PC in the LAN
1. Launch an Internet browser on the local PC.
2. Enter the IP address of the camera in the address bar of the browser.
A remote PC in an external Internet out of the LAN network may not be able to
connect to the camera installed in the intranet if the port-forwarding is not properly
set or a firewall is set. In this case, to resolve the problem, contact your network
administrator.
Factory default IP address is 192.168.2.100.
To change the IP address, use the Search IP.
For further details on Search IP use, refer to “Static IP Setup”.
