13
4.3 Change the address of visual camera
SAME WITH PT system address
Open the housing. Check the SETUP in the rear of visual camera (Fig.7)
F
Popup the menu of camera after pressing the SETUP about 2 seconds refer to Fig.8
Pressing
『
SETUP
』
switch
(up or down), you can move up or down on the menu to
“COMMUNICATION”. And press
『
SETUP
』
switch to enter “COMMUNICATION” menu, shown as
Fig. 9.
1.
Protocol
Must be PELCO-D; otherwise the Thermal imaging camera cannot be
controlled.
