Intellisystem ThermalTronix TT-607FG-HTI, User Manual

Page: 15 / 24

14
14
4.2.1.1
Measurement settings
Temperature range
：
-
40/180
℃
、
100/500
℃
for temperature measurement, Observed
、
Shake mode for gas detection.
Extend lens
：
need to change if the camera fixed with any extend lens.
Temperature Units: The currently available temperature units are
℃
, K.
Ambient Temperature : Infrared Gas Leak Detector When the imager is turned on, it
automatically detects the ambient temperature.
Reference temperature: When the reference temperature is set to "On", the
temperature of each object displayed on the screen is the difference with the reference
temperature.
Reference temperature: This is effective when the reference temperature setting is set to
"On." A fixed temperature can be used as the reference temperature degrees; you can
also select the temperature of any object temperature as a reference temperature.
4.2.1.2
Temperature correction
Specific radiating factor : Because different objects have different emissivity, different
emissivity can be set for different measuring points, and when not set, the system default
ratio coefficient is applied. The accessory provides specific radiation Rate for reference.
Correction temperature : used to set the system temperature correction when the
temperature.
Distance : Set the distance between the infrared gas leak detector and the temperature
measurement target, in order to make the temperature measurement accurate.
Humidity : Sets the relative humidity of the environment in which the Infrared Gas Leak
Detector is used.
Background temperature : This function is required when there are other objects that
are higher than the temperature of the measured object and affect the measured value.
This function is to eliminate the influence of other super-high background temperature on