34
1)
Lan Settings
Default the IP address is 192.168.100.88, The
MAC address can be modified.
2)
Port Settings
A.
HTTP Port
IP address identifies the network device, the
device can run multiple web applications, each
network program using network port to transmit
data, so data transmission to be carried out
between the port and port. Port setting is to set up
WEB SERVER program using which port to
transmit. When port mapping, need to be
consistent with the port number (default port: 80)
B.
RTSP Port
Network camera support RTSP protocol, use the
VLC tools broadcast.
C.
PTZ Port
Support PTZ protocol, default port: 5678.
3)
Control Protocol Setting
Setting camera control communication protocol,
include Visca address, Pelco-D address, Pelco-P
address.
4)
RTMP Setting
Setting the camera stream, can set up two stream,
in the two-stream selection control code stream of
"On", "Off", "Video", "Audio", etc.
5)
RTSP Setting
Setting network camera RTSP protocol of "On",
"Off".
6)
ONVIF Setting
Setting the ONVIF protocol and ONVIF
authorization "On", "Off".
7)
Multicast Setting
Setting multicast “On", "Off", and multicast
address (default address 224.1.2.3) and port
(default 6688)
8)
Apply / Cancel
Modify network parameters then press "Apply"
button to modify network parameters, press
"Cancel" button to cancel network parameters.
6.7
Device Information, please click
“information”
Show the current device information, as shown
below.
