120
Application
Power output function is mainly used in the camera field demonstration and testing, meanwhile, for
some cameras installation sites, if there is no power outlet for the adapter to power the camera, the tester
can offer temporary power for it. But we do not suggest tester supply power for a long time.
Notice:
a.
Don’t input any power into the “DC12/2A OUTPUT” port of the tester.
b.
Man-made damage is not within our company’s warranty.
c.
The IP tester ’s power output capacity is 2A. If the IP camera uses more than 2A, the tester will
automatically enter a protection mode.
d.
Disconnect all cables from the tester and reboot it to resume using the tester.
The IPC tester power output is close to 2A, if the IP camera’s power is over 2V, the tester will
auto enter protection mode. Disconnect all the connections of the tester and then connect the
tester with power adaptor to resume the tester.
e.
Make sure the tester has a sufficient charge, otherwise tester can’t provide enough output power.
3.8 USB 5V 2A power output
When the tester is turned on, the DC 12V and DC 5V power output functions are automatically turned
on. If the IP tester is turned off, the DC 5V USB can still be used to power an external USB device.
NOTE: The USB port is for power only and not data.
