7
32
Visible red laser source emits Interface
(Optional)
33
Power battery switch
34
DC 12V 2A charging interface
35
Audio input
36
Audio output and earphone interface
37
USB 5V 2A power output (used only for power, not data)
38
UTP cable port: UTP cable tester port/ Cable tracer port
39
Micro SD card moveable,(comes with 8GB, supports up to 32GB)
40
HDMI output interface
3 Operation
3.1 Installing the Battery
The battery main switch at the right-bottom corner of tester bottom
。
“
0”: Battery power off
“
1”: Battery power on
The tester has built-in lithium ion polymer rechargeable battery, the tester’s bottom power should turn
to “0”for safety during transportation (the factory default is “0”)
Using the instrument, pls switch power button to “1”, press the several seconds can turn
on/off tester. In general, user no need to turn on battery switch. If don’t use the instrument in long time,
pls turn off the switch.
Notice: Pls use the original adaptor and connected cable of the device!
When the battery icon is full or the charge indicator turns off automatically, indicate the battery
charging is completed
Notice: When the Charge Indicator
turns off, the battery is approximately 90%
charged. The charging time can be extended for about 1 hour and the charging time within 12