Intellipure 950P
7
Installation Procedures
POWER REQUIREMENT
The power requirements are as follows:
*Electrical disconnects may also be required - check local electrical codes
Model
Power Requirement
FLA
Power Usage
Max Start-up
V
Hz
Phase
AMPS
WATTS
950P
120
60
1
3.3
390
950P
220
50
1
1.71
390
LOCATION DETERMINATION
The 950P is designed as a portable floor model, the location and operation of the unit shall follow state /local code for
installation of electrical devices.
Place the air purifier anywhere in the room and on a flat and level surface to allow continuous airflow to the bottom intake
and out the top outlet grill.
For best performance, it is recommended to place the air purifier at least two (2) feet from walls and other obstructions.
Do not place the air purifier where drapes or other objects block airflow.
Always lock both casters.
Do not run power cord under carpeting or near heaters, registers, radiators, stoves or fireplaces. To avoid a tripping hazard,
keep the power cord away from traffic areas.
Never operate the air purifier in areas where combustible gases or vapors are present or any other flammable materials.
Do not operate unit using an extension cord.
