Intellinet 561587 User Manual Download

Page: 40 / 121

48-Port Gigabit Ethernet PoE+ Managed Switch with Four 10G SFP+ Uplinks

User Manual

Trunk Ports (tagged)

Trunk ports are designed to filter out packets that have either no VLAN tag or VLAN tags

that are not on the allowed VLAN ID list.

Trunk ports do not remove any existing VLAN tags from incoming packets.

Trunk ports do not add a VLAN tag to any incoming untagged packet.

Trunk ports are ideal for switch-to-switch connections or for devices that have the ability
to tag packets by themselves such as VoIP phones.

Hybrid Ports

These are a combination of access and trunk ports.

Hybrid ports will tag any incoming packet that has no VLAN ID with the VLAN ID the port

has been assigned to.

Hybrid ports will also act as trunk ports for packets that have a VLAN tag.

Selecting

Advanced Application

VLAN

in the navigation bar lets you configure a VLAN.

Summary of Contents for 561587


























































































































Search results

Summary of Contents for 561587

Reviews:

Related manuals for 561587

Brands by name

Popular brands

Intellinet 561587, User Manual

Search results

Summary of Contents for 561587

Reviews:

Related manuals for 561587

Brands by name

Popular brands