Intellinet 561587 User Manual Download

Page: 17 / 121

48-Port Gigabit Ethernet PoE+ Managed Switch with Four 10G SFP+ Uplinks

User Manual

Use the screws provided with the equipment rack to mount the Switch on the rack and

fix it.

3.2.2

Desktop Installation

Users can place the switch on a clean, dry, sturdy support structure such as a desk, table or
bench that can fully support the weight of the switch and its connections:

Ensure that the air around the switch is well ventilated.

3.3

Power Cord Connection



Ensure that the ground wire is connected before connecting the power cord.

Connect the AC power cord

Follow these steps to complete the connection:

Connect one end of the switch to the power socket on the back panel of the switch

cabinet.

Plug the other end of the power cord into an external AC power outlet to power the

switch.

Check whether the status indicator on the front panel of the switch is ON. The indicator is

ON to indicate that the power supply is connected properly and that the switch is

initializing.

Summary of Contents for 561587


























































































































Search results

Summary of Contents for 561587

Reviews:

Related manuals for 561587

Brands by name

Popular brands

Intellinet 561587, User Manual

Search results

Summary of Contents for 561587

Reviews:

Related manuals for 561587

Brands by name

Popular brands