24-Port 10/100/10 2-Port 1000/10000Mbps SFP+ Ethernet Switch |
5
Chapter 2 External Component Description
2.1 Front Panel
The front panel of the switch consists of a series of LED indicators, 24 x
10/100/1000Mbps RJ-45 ports, 2 x 1000/10000Mbps SFP+ ports, one Flow Control
switch and one Trunking switch, as shown below:
Figure 1 - Front Panel
10/100/1000Mbps RJ-45 ports (1-24):
Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or
1000Mbps. Each has a corresponding Link/Act LED.
SFP+ ports (25, 26):
Designed to install the SFP+ module and connect to the device with a bandwidth of
1000Mbps or 10000Mbps. Each has a corresponding Link/Act LED.
Flow Control switch:
Turns Flow Control ON or OFF.
Port Trunking switch:
Turns SFP+ port Trunking ON or OFF.
LED indicators:
The LED indicators allow you to monitor, diagnose and troubleshoot any potential
problem with the switch, connection or its attached devices.
Figure 2 - LED Indicators
The following chart shows the LED indicators of the switch along with explanation of
each indicator.
