High-Power Ceiling Mount Wireless 300N PoE Access Point
2
Hardware Description
Ethernet Port:
Ethernet port jack (RJ45) for wired Ethernet connections. The port supports 10
and 100 Mbps connections. It also acts as a IEEE802.3 af/at compliant PD port, so you can
connect it to a PoE injector or PoE switch.
Power Interface:
For non‐PoE applications you can use this port to connect the power adapter
(included).
Reset Button:
If you need to restore the access point to the factory default settings, you can use
a sharp object to push in the reset button. Do that for about 6 seconds and the Access Point will
automatically restore the factory settings and restart.
Bracket Attachment Points:
Wall or ceiling mount installation requires affixing the bracket
(Figure 1) to the wall or ceiling, and then slide the bracket onto these two hooks.
Figure 1