Intellinet 525497 User Manual Download Page 35

Page: 35 / 82

e. PPTP

If you select

PPTP

, fill in these fields.

Item

Description

PPTP Server IP

Address

Allows you to make a tunnel with remote site directly to secure the data

transmission among the connection. You can use embedded PPTP client

supported by this device to make a VPN connection. If you select the PPTP

support on the WAN interface, fill in the IP address for it.

User Name

Fill in the user name to log in to the PPTP server.

Password

Fill in the password to log in to the PPTP server.

Address Mode

Static:

To configure the IP address information manually, fill in the related

settings below.

Dynamic:

This option allows the machine to get IP address information

automatically from the DHCP server on the WAN side.

IP Address

Fill in the IP address for the WAN interface.

Subnet Mask

Fill in the subnet mask for the WAN interface.

Default Gateway Fill in the default gateway for WAN interface outgoing data packets.

Operation Mode

Keep Alive:

Keep the PPTP connection all the time. Also configure the Redial

Period field.

Manual:

Lets a user connect manually.

When you finish these settings, click

Next

to jump to Step 3.

Summary of Contents for 525497



















































































Search results

Summary of Contents for 525497

Reviews:

Related manuals for 525497

Brands by name

Popular brands

Intellinet 525497, User Manual

Search results

Summary of Contents for 525497

Reviews:

Related manuals for 525497

Brands by name

Popular brands