14
QUICK INSTALLATION
subnet Mask:
enter the ISP-provided subnet mask; e.g.,255.255.255.0.
server ip address
: enter the IP address of the ISP gateway.
user name
: enter the username provided by your ISP for the PPTP
connection (sometimes referred to a the connection Id).
password
: enter the password provided by your ISP.
Click “Next” to proceed to the next screen
.
2.4 wireless basic settings
This screen displays when you click “Next” after configuring any of the
four WAN interfaces above.
band:
This allows you to set the router (acting as an access point) as
802.11b or 802.11g mode. You can also select B+G mode to allow
the AP to select either 802.11b or 802.11g automatically.
ssid:
enter a name for the wireless lAN. All the devices in the same
wireless lAN should have the same eSSId.
channel number:
Select the channel to be used by the wireless lAN.
All devices in the same wireless lAN should use the same channel.
enable Mac clone:
Select to allow the router to copy the first seen
MAC address to the WlAN MAC.
Click “Next” to proceed to the next screen
.
