Screen Saver
In order to extend the life of your screen, Zeroscope 1U features a built-in screen saver, which turns
off the display after a user-definable length of time. If the screen has turned off, simply press or turn
the encoder to turn the display back on.
To set the amount of time until the screen saver dims the screen:
1.
Long-press (>1 sec) the encoder to open the Advanced Settings menu.
A small menu of options appears to the right of the display.
2.
Turn the encoder to select the SCOPE option.
3.
With the SCOPE option highlighted, push-turn the encoder and select TUNE mode.
4.
Turn the encoder to select the SCREEN SAVER option.
5.
Push-turn the encoder to set how long Zeroscope should wait until it turns off the display
screen.
You can choose between: 1 min, 2 min, 5 min, 10 min, 30 min, 1 hour, 2 hour, and never.
FIRMWARE
Firmware updates, if available, are contained within the latest
Intellijel Firmware Updater
application, which you can download from the product’s page on the Intellijel.com website. The
application is available in both Macintosh and Windows formats, and will install firmware into your
module over USB. Download the app, then use the drop-down list at the top of the application to
select the product you wish to update, and the firmware version you want to install. Click the
Instructions
button to read specific instructions for updating your module.
Change Log
1.4 (Oct 26, 2020)
● FEATURE: Added an option to set the amount of time until the screen saver darkens the
screen. Time is accessed via a menu on the TUNER screen, as described in
1.3 (Nov 14, 2019)
● FEATURE: Added a Screen Saver
1.2 (Jan 08, 2019)
● Initial product release
Zeroscope 1U Manual
13