BACK PANEL
There are two 3-pin Link connectors on the rear panel, and each
Switched Mult 1U
module ships
with one 3-pin Link cable, which you use to connect other 3-pin Link modules. Common pairings
include:
●
XY I/O 1U
: Connect the middle (JP2) 3-pin Link connector on the back of the
XY I/O 1U
to
either of the 3-pin Link connectors on the back of the
Switched Mult 1U
. Now, any signal
patched into the
X
jack on the
XY I/O 1U
is multed to any
Switched Mult 1U
jacks that have
their Bus Switches set to the
X
(up) position. Similarly, any signal patched into the
Y
jack on the
XY I/O 1U
is multed to any
Switched Mult 1U
jacks that have their Bus Switches set to the
Y
(down) position.
● Additional
Switched Mult 1U
modules : Connect either of the 3-pin Link connectors on the back
of
Switched Mult #1
to either of the 3-pin Link connectors on the back of
Switched Mult #2
.
Now the
X
bus is shared across both Switched Mults, as is the
Y
bus. You can chain more
modules together in the same way, which can also be useful for spreading mult jacks across the
width of your modular case.
TECHNICAL SPECIFICATIONS
Switched Mult 1U Manual
6
Width
14 hp
Maximum Depth
18 mm
Current Draw
No current draw - module is passive
