INSTALLATION
This module is designed for use within
an Intellijel-standard 1U row, such as
contained within the Intellijel 4U, 7U and
Palette Eurorack cases. Intellijel’s 1U
specification is derived from the
Eurorack mechanical specification set
by Doepfer that is designed to support
the use of lipped rails within industry
standard rack heights.
Because this is a passive module, it
requires no power to operate.
Ensure your case has enough free space (hp) to fit the new module. To prevent screws or other
debris from falling into the case and shorting any electrical contacts, do not leave gaps between
adjacent modules, and cover all unused areas with blank panels. Similarly, do not use open frames
or any other enclosure that exposes the backside of any module or the power distribution board.
Switched Mult 1U Manual
3
