/
Steppy 3U Manual
sequence (sequences can be any length from 1 to 64 steps). A button turns
RED
when it’s the active step in a sequence.
●
Select Mode
: In Select mode, the buttons perform the functions indicated by the
labels with the black backgrounds.
Enter Select Mode by pressing the black
SELECT button
[2]
. In Select mode, the left
column of buttons select the current track and
page, and the right column turns mute on/off
for each track, as well as enabling the Page
Follow ( ) function, the performance
looping feature (
), pattern clearing and
reset.
YELLOW
buttons indicate the selected Track
and Page (left column), as well as the state of
the Page Follow ( ) and Loopy (
)
features in the right column. Buttons in the
right column (immediately to the right of the
four Track buttons) light
YELLOW
when the
corresponding track is Muted.
Select Mode is indicated when the yellow
Select Mode LED is lit. You can also tell
you’re in Select Mode because (in general)
most buttons are
YELLOW
for detailed information.
●
Edit Mode
: In Edit Mode, the buttons select
and modify various parameters, as indicated
by the labels to the right of the buttons in the
right column.
Enter Edit Mode by pressing the red EDIT
button
[3]
. In Edit mode, the right column of
buttons select which parameter you wish to
edit (GATE, CLK ÷, etc), and the left column
of buttons sets its value. In general, the top button in the left column sets the
minimum value for a parameter, and the bottom button sets the maximum value,
with interim values spread across the middle six buttons.
Page 11