Connecting to a 1st Generation Audio Jacks Board
If your case has the 1st generation board, you have two choices:
A) Purchase and install a 2nd generation
Audio Jacks Board
. This has the advantage of providing
you with greater flexibility, allowing you to mix and match which modules you wish to connect to
the jacks.
B) Purchase a
Pedal I/O 7U Case Adapter
, which connects to the single connector on a 1st
generation audio jacks board, enabling you to use it with a pair of
Pedal I/O 1U
modules.
If you chose to purchase the
Pedal I/O 7U Case Adapter
,
simply connect it to the
Pedal I/O
module with the link
cable as shown to the right.
Note that you can connect
two
Pedal I/O
modules to a single
Pedal I/O 7U Case Adapter
.
Next, plug the
Pedal I/O 7U Case
Adapter
into the your case’s first
generation
Audio Jacks Board
, making
sure to align the white lines on the two
boards, as shown to the right.
Pedal IO 1U System Manual
