µJack Manual
C.
L Out
This jack carries the attenuated output of the modular-level signal sent into the
LEFT
Input
jack. It enables you to interface your modular gear with external mixers, power
amps or DAWs, and is an unba4 dBu ¼” output. For use with -10dBv systems,
simply dial back on the corresponding channel’s attenuator.
D.
R Out
This jack carries the attenuated output of the modular-level signal appearing at the
RIGHT Input
jack. Like the
L Ou
t jack, it enables you to interface your modular gear with
external mixers, power amps or DAWs, and is also an unba4dBu ¼” output,
which you can attenuate down to -10dbV levels.
E.
HEADPHONE Output
This is a stereo ¼” output intended primarily for headphones. Its volume level is set with
the
HEADPHONE Level
knob, and you can monitor the Left and Right signals in either
stereo or mono, depending on the position of the
MONO/STEREO switch
.
Technical Specifications
Width
6 hp
Maximum Depth
26 mm
Current Draw
17 mA @ +12V
17 mA @ -12V
Page 7
